loading

Fusai - Trusted Trailer Parts Manufacturer and Supplier Since 2003

What to do if the brake disc of the car rusts

Most of the brake discs are made of cast iron, and they are exposed for a long time, and the working environment is relatively awful. They often face the test of ice and fire. If the vehicle is parked for a long time, or when it is in a humid environment, some rust will be generated on the surface of the brake disc, and these rusts will more or less affect the normal operation of the brake system, so we need to consciously apply it Clean up. Next, please let me know what to do if the brake disc of the car rusts due to rainy days or long-term suspension.

If there is only slight rust on the surface, then we can use continuous braking method to clean it. Of course, this is under the premise of ensuring safety and not affecting public transportation. While driving, lightly press the brakes to allow the friction between the brake pads and the brake disc to 'polish' the surface.

If the condition of rust is serious, we do not recommend the above method of depressing the brake. When there are many rust marks, the surface of the brake disc will be uneven. In this case, the brake will cause the body to shake. The driver can obviously feel the abnormality of the brake pedal, steering wheel and body. At this time, it will be difficult to remove the rust. Even if it is barely 'polished', it will cause abnormal wear of the brake pads afterwards, and there will still be jitters.

So we try to drive the vehicle into the repair shop, remove the brake discs, sand the rust with sandpaper to clean it, check the surface of the brake pads for abnormalities, and conduct a road test after proper installation. Drive on a flat road at a speed of 70KM / H per hour and apply multiple brakes to ensure that there are no abnormalities. If there are still jitters, it means that the surface of the brake disc is not flat, and it needs to be further polished or leveled or replaced as appropriate.

The above is about rainy days or long-term stoppage which caused the brake discs of the car to rust. What do you do? Do you understand? If you want to know more about brake discs, please pay attention to our website, wonderful content will be presented to you at any time!

GET IN TOUCH WITH Us
recommended articles
200 FAQ INFO CENTER
Technical status of dynamic platform car axle will directly affect the various properties of the car, therefore, for the power car axle according to regulations for maintenance, the maintenance of the mileage and team failure to timely diagnosis and elimination.
Small make up to introduce today is about some of semi-trailer hydraulic leg failure analysis, everyone understands this, in the later when the leg problems also need not worry too much, so the specific look at together: (
1)

Semi-trailer oil leak was due to a loose connection, should find the place, tighten the;
Seal is damaged, should be replaced;
Have crack line, should be replaced or weld repairs.
Lianyungang huayang machinery manufacturing co.
Common axle type mainly has: the external type brake drum series, the series of built-in brake drum, spoke type wheel series, the series of low bed series, type axle, American axis tilting axis.
Hydraulic trailer axle, dynamic platform car axle and wheel handle locomotive bridge is my company's main products, from the general customers trust in the industry, the quality of our trailer axle is good, but it is not easy, in the use of trailer below give you an overview of the trailer axle transmission should pay attention to three points!

Transmission of maintenance is very important, trailer is not exceptional also, especially during the period.
First, expert proposal, the owners can launch about half a minute in semi gear drive, and then drive after normal operation, extend the time of the vehicle in the winter.
Sometimes have to say that people are really smart, know how to save yourself, electric truck can be said to be many factories are an essential part of.
A, remove 1 of semi-trailer axle, lifted vehicles, remove the front wheel.
Axle function is passed between frame or frameless body and wheels and the direction of forces generated by the bending moment and torque.

As a rapidly developing trailer parts provider, our company now covers an area of 20,000 square meters, and has more than 150 employees.

contact us

Contact Person: Mr. Huawei Wang
Tel: +86-13356687529 / +86- 15753112927
 / +86-13280015673
E-mail: whw@sdfhcheqiao.com
Fax: +86-531-83828182
Address: Nanwang Industrial Park, Xianggong Town, Zhangqiu City, Shandong Province, China 
Copyright © 2026 Shandong Fuhua Axle Co., Ltd. | All Rights Reserved | Sitemap
Contact us
wechat
whatsapp
Contact customer service
Contact us
wechat
whatsapp
cancel
Customer service
detect