Axle steering heavy troubleshooting

Axle is one of very important automotive spare parts, so we should pay attention to in the process of the use of the axle at ordinary times good maintenance, but also there will be a failure in the process of operation of the axle, axle steering heavy problem before as old friends ask to us, let's lianyungang huayang machinery manufacturing co. , LTD. Is to introduce for everybody! 1, automotive steering axle fault phenomenon, turn the steering wheel to feel heavy, and there is no back is feeling. 2, axle failure reason ( 1) Steering knuckle arm deformation. （ 2) Steering knuckle bearing oil shortage or damage. （ 3) Steering knuckle king pin and bushing gap is too small or short of oil. （ 4) Front axle or frame deformation caused by wheel alignment phrase. （ 5) Tire pressure is insufficient. 3 first set up front axle, axle fault diagnosis diagnosis, turn the steering wheel by hand, if it is easy to feel to have no longer turn difficult feeling, this suggests that the failure parts in front axle and the wheel. Because set up after the front axle and steering has no wheels and road surface friction resistance, but only depends on the working condition of steering, etc. At this point should be check carefully whether the front tire pressure is too low, the front axle without deformation; At the same time also want to consider leaf spring are in good condition before inspection, frame with and without deformation. When necessary, check the wheel alignment Angle is correct. Above is our lianyungang power platform car axle factory, lianyungang huayang machinery manufacturing co. , LTD. To tell you about about the analysis of the causes of axle steering heavy, relevant tags: dynamic platform car axle