Automechanika Shanghai 2018
The classification of the axle trailer axle tell you
by:FUSAI
2021-01-28
According to different suspension structure, the axle is divided into integral and breaking two kinds.
When taking the independent suspension, the center of the central axle is solid or hollow beam, the axle is the integral axle;
Breaking axle joint structure for activity, with independent suspension.
One-piece axle is like a huge barbell, at both ends by suspension system to support the body, so integral axle usually cooperate with the independent suspension;
Breaking axle, like two umbrella in on both sides of the car body, followed by their respective suspension system to support the body, so breaking axle with independent suspension.
According to different driving mode, the axle is divided into drive axle, steering axle and steering bridge four axles and support.
The steering axle and support bridge are driven bridge.
Most of the cars driven by lead after (
FR)
, so the front axle as steering axle and rear axle as the drive axle;
And before the front drive (
FF)
Automobile front axle be steering drive axle and rear axle bridge ACTS as a support.
To bridge structure is basically the same, is composed of two steering knuckle and a beam.
If the beam to the body, steering knuckle is the head, he swung his neck is that we often say that the king pin, wheel is installed on the steering knuckle, like the head with a straw hat.
However, when you drive, turn straw hat, head did not turn, middle separated with bearing, head just sway.
Neck -
-
King pin is wheel rotation axis, the axis axis is not perpendicular to the ground, the wheels themselves are not vertical, there is a lesson in wheel alignment.
The difference between the steering drive axle and steering axle is everything is hollow, beam into a bridge shell, steering knuckle became a steering knuckle shell, because inside the root drive shaft.
Because of this drive axle is located in the middle of the bridge shell differential in two, and turned into two half shaft.
Two hat is not simply set on the head, with the inside of the two half shaft directly connected.
Half shaft in & quot;
Neck & quot;
The location of the - also have one more joints
-
Universal joint, so half shaft is turned into two parts, inside outside half shaft and half shaft.
Relevant tags: steering axle
Custom message