Why is automobile front axle with relay valve will be frozen?
Normally, causing the front axle with relay valve freeze for the following reasons: 1, spiral discharge pipe are too short, when compressed air from the air pump into the gas reservoir, the temperature dropped to below 65 degrees Celsius.
Due to the high temperature in the compressed air cooled contains too much water, into the body to produce water temperature is below zero, freezing, cause body stuck, so as to make the automobile front axle with relay valve will be frozen.
2, due to the lost of compressed air drying chamber residual water filtering effect.
To achieve the purpose of drying compressed air has no and cause the automobile front axle with relay valve pipe and valve body internal water freezes, thus affect the normal use of the brake.
3, gas reservoir water on a regular basis, resulting in gas reservoir internal water with compressed air into the body, when the temperature below freezing, the automobile front axle with relay valve body caused by internal icing.
Above is the automobile front axle with relay valve will freeze some of the reasons why the, hope everyone to understand somewhat, and try to avoid.
If there are any axle demand, welcome consulting lianyungang huayang machinery manufacturing co. , LTD.
Relevant tags: semi-trailer axle