Structure of automobile front axle semi-trailer axle manufacturer interpretation

by:FUSAI     2021-05-21
Semi-trailer axle factory today to make a brief introduction of the structure of the automobile front axle, interested friends can to understand the simple together. Sales by the front axle semi-trailer axle manufacturer structure is mainly the front axle and steering knuckle, king pin, brake assembly, wheel hub, tie rod assembly, knuckle arm tie rod assembly, etc. 1, semi-trailer axle manufacturers to explain in detail: the front axle is primarily a front axle of the main bearing parts, pipe and forging type two kinds of structure forms, each one a punch shape on both ends of the front axle of bold part as the part of the king pin installation. Both sides of the middle part of plate spring bearing surface, used to install the steel plate spring and its accessories. 2, semi-trailer axle manufacturers explanation: steering knuckle mainly is front axle on the main steering knuckle. It use the king pin and hinged front axle and the wheel hub bearing supporting the wheel pair, to realize the steering function. 3, semi-trailer axle manufacturers explanation: king pin is one of the important parts have an impact on the performance of the vehicle. There is stop groove on king pin, pin lock by retaining groove to fix king pin on the front axle of king pin hole, can make the king pin rotating axial movement. 4, semi-trailer axle manufacturers explanation: brake assembly is the main element to realize the wheel brake, with oil and gas brake two forms. In vehicle brake command, and the brake drum brake friction slices through the expansion of the processing surface contact creates friction braking. Front axle brake choice is critical, if choose undeserved, can appear before and after the brake force do not match, the problem such as braking is put less than required. 5, semi-trailer axle manufacturers explanation: wheel combination by two main rolling bearing installed on the steering knuckle, driven wheel rotation. And friction plate forming friction pair at the same time, realize the wheel brake. 6, semi-trailer axle manufacturers explanation: main tie rod assembly is the main component of the beam before the adjustment. Shaft was made by seamless steel tube, both ends is the joint structure of the spherical hinge assembly, through the screw thread cooperate after installed on the tie rod arm, the shaft is adjustable, in order to adjust the toe. 7, semi-trailer axle manufacturers explanation: knuckle arm straight lever arm, tie rod arm, main points, respectively, and the straight rod assembly and tie rod assembly. Formation of steering and steering trapezoidal mechanism. Steering gear to complete vehicle steering, steering trapezoid determines the Angle of inside and outside of the vehicle is reasonable. That is about the interpretation of the automobile front axle semi-trailer axle manufacturer structure, hope to help you! Relevant tags: semi-trailer axle
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...