Tips for the brake failure of trailer accessories

by:FUSAI     2021-05-21
What we want to introduce to you is how to deal with the brake failure, that is, some tips for the brake failure: 1. When the vehicle is going down a long slope or a steep slope, you should step on the brake regardless of the situation. It can not only check the braking performance, but also gain the time to control the speed when the brakes are found to be malfunctioning. It is also called predictive braking. 2. Control the direction according to the road conditions and vehicle speed, disengage the high gear, and at the same time swiftly blast the empty oil to shift the high gear into the low gear. In this way, there is a great traction resistance at the time of launch, which reduces the vehicle speed rapidly. In addition, when changing low gears, the handbrake should be used separately, but it should be noted that the handbrake cannot be pulled tight or pulled too slowly. If it is pulled too tightly, it is easy to 'lock' the brake disc, which may damage the transmission parts and lose its braking ability; if it is pulled too slowly, the brake disc will wear out and lose its braking effect. 3. The bumper, carriage and other rigid parts of the application vehicle rub and collide with the natural obstacles (rocks, trees or soil slopes) on the roadside to achieve the purpose of forced parking to escape danger and reduce accident losses as much as possible. 4. When the downhill brake fails and the vehicle's own mechanism cannot be used to control the speed, the driver should decisively use natural obstacles such as roadside rocks and trees to form resistance to the vehicle. If there is no suitable terrain or object to be used for a while, in an emergency, one side of the vehicle body can be moved closer to the mountainside to increase resistance by friction and gradually reduce the speed of the vehicle. 5. The brakes fail when going uphill, so you should reduce to mid-to-low gear at the right time, and stick to enough power to drive uphill to stop. If you need to stop at half a slope, you should stick to the low gear, tighten the hand brake, and block the wheels with stones, skids, etc. in time. If there is a back-sliding phenomenon, the rear of the vehicle should face the hillside or the safe side, and turn on the headlights and emergency signal lights to arouse the attention of the front and rear vehicles. Related tags: semi-trailer axle
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...